HPE Apollo 4510 Gen10 Rack Server CTO Online Hot Sale

• Up to 60 hot-plug LFF drivers support in the front driver drawers with side loaded design
• 4U form factor fitting in HPE Standard 1075 mm racks
• Up to three X16 PCIe Gen3 slots.
• HPE Scalable persistent memory
• Front 2 hot-plug SFF in the HPE ProLiant XL450 Gen10 Server supports SAS/SATA/NVMe/SSD drivers with optional HPE Smart Array Gen10 controllers
• Additional boot/drive options: SATA M.2, dual uFF SSD (2 x M.2 cartridges)
• Intel Xeon processor scalable Family from 4 – 26 Cores, 85 – 150 W, 1.8 – 3.6 GHz
• HPE DDR4 SmartMemory up to 2666 MT/s
• HPE Flexible slot power supplies, 800 W and 1600 W, options of AC/ DC/ 277 V ac up to 96% efficiency

Purpose-built System for Big Data Solution Workloads

The HPE Apollo 4510 Gen10 System offers enterprise data centers dense storage and compute capabilities for Big Data Solutions, such as object storage or data analytics solutions.

Up to 60 hot-plug front-loaded Large Form Factor (LFF) disk drives load into two drawers, delivering up to 840 TB per system.

Supports Intel Xeon Scalable processors with up to 26 cores and memory speeds up to 2933 MT/s providing the improved computing power for massive Big Data applications.

Scale-out System for Enterprise Customers

The HPE Apollo 4510 Gen10 System can fit in the Hewlett Packard Enterprise standard 1075 mm rack with 2 front loading disk drive drawers and can support up to 60 LFF hot-plug drives.

Enterprise customers who are looking for larger data capacity with standard racks in their data centers can scale out the data center capacity without deploying 1200 mm or deeper racks.

Delivering one of the highest storage capacities in any 4U server with standard server depth.

Security Innovations

The HPE Apollo 4510 Gen10 System combined with our industry standard HPE ProLiant Gen10 Servers deliver firmware anchored directly into the silicon, with security protection built in across the server life-cycle starting with Silicon Root of Trust.

Millions of lines of firmware code run before server operating system boots and with Runtime Firmware Validation, enabled by HPE iLO Advanced Premium Security Edition, the server firmware is checked every 24 hours verifying validity and credibility of essential system firmware.

Secure Recovery allows server firmware to roll back to the last known good state or factory settings after detection of compromised code.

Additional security options are available with Trusted Platform Module (TPM) to prevents unauthorized access to server and securely stores artifacts used to authenticate the server platforms while the Intrusion Detection Kit logs and alerts when the server hood is removed.

---

---

HPE Apollo 4510 Gen10 Base Knowledge
The Apollo 4510 Gen10 4U Rack server has up to 2 processors supported. Mixing different processor models is not supported. The 4510 Gen10 Server has a single XL450 Node that holds 2 SFF drives while the Apollo 4510 holds up to 60 LFF Drives. When two processors are selected a minimum of three power supplies per chassis is required.

There are 16 DIMM slots available with 2 processors, 6 channels per processor, Up to 2 DIMMs per channel. LRDIMM, RDIMM maximum memory capacity is 1024 and 512 GB. Mixing of RDIMM and LRDIMM memory is not supported. HPE Persistent Memory featuring Intel® Optane™ DC persistent memory is only supported with select 2nd-generation Intel Xeon Scalable Series Processors ONLY (62xx/52xx/4215) and can only be mixed with either RDIMMs or LRDIMMs. PMEM maximum 512GB per processor/socket.

HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. If you plan to install SAS drives in the XL450. You will need to install one of the following. E208i-a and P408i-are connect to the 2 SFF drives in the server node and provide the capability for (up to) 12G SAS or 6G SATA hardware RAID/HBA functionality. If any of the Smart Array Performance RAID Controllers (P series) is installed. They require the purchase of one of the HPE 96W Smart Storage Battery (up to 20 Devices) with a 145mm Cable Kit (P01366-B21).

HPE Apollo 4510 Gen10 Maximum Internal Storage

Drives	Maximum Capacity (raw)	Configuration
Hot Plug LFF SAS HDD	1200TB	60 x 20TB
Hot Plug LFF SATA HDD	1200TB	60 x 20TB
Hot Plug LFF SAS SSD	96TB	60 x 1.6TB
Hot Plug LFF SATA SSD	460.8TB	60 x 7.68TB
Hot Plug SFF SAS HDD	4.8TB	2 x 2.4TB
Hot Plug SFF SATA HDD	4TB	2 x 2TB
Hot Plug SFF NVMe SSD	30.7TB	2 x 15.36TB
Hot Plug SFF SAS SSD	30.7TB	2 x 15.36TB
Hot Plug SFF SATA SSD	15.36TB	2 x 7.68TB
—–	—–	—–
M.2 Riser Board	3.84TB	2 x 1.92TB

HPE Apollo 4510 Gen10 NVMe Drives
If SFF NVMe SSDs are selected, an HPE Smart Array controller is not required. The NVMe drives can only be installed in the XL450 2 SFF Drive slots. The main Chassis only supports HDD or SSD in a 3.5” Form Factor.

HPE Apollo 4510 Gen10 M.2 Drives
Two (2) M.2 22110 NVMe drive slots in the HPE ProLiant XL450 Gen10 Server. You can save room and make the boot more efficient when using the HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device (P12965-B21).

HPE Apollo 4510 Gen10 PCI Risers
With 2 Processors installed, all 3 PCIe slots are available along with the FlexibleLOM adapter which does not take up a PCIe slot. The Apollo 4510 Gen10 ships with 2x 1 Gb Ethernet ports embedded. If any SAS drives are installed, you be required to select one of the Smart Arrays. If any of the Performance arrays are installed, you will then need to also add the HPE 96W Smart Storage Battery (up to 20 Devices) with a 145mm Cable Kit (P01366-B21).

HPE Apollo 4500 Gen10 CPU0 x2/CPU1 x2 FIO I/O Module (default)
Expansion Slots #	Technology	Bus Width	Connector Width	Form Factor	Notes
1	PCIe 3.0	X16	X16	Full-height, half-length slot	Proc 2; SA
2	PCIe 3.0	X16	X16	Full-height, half-length slot	Proc 1; SA
3	PCIe 3.0	X16	X16	Low profile slot	Proc 2
4	PCIe 3.0	X8	N/A	FlexLOM	Proc 1

HPE Apollo 4500 Gen10 CPU0 x3/CPU1 x1 FIO I/O Module
Expansion Slots #	Technology	Bus Width	Connector Width	Form Factor	Notes
1	PCIe 3.0	X16	X16	Full-height, half-length slot	Proc 2; SA
2	PCIe 3.0	X16	X16	Full-height, half-length slot	Proc 1; SA
3	PCIe 3.0	X16	X16	Low profile slot	Proc 2
4	PCIe 3.0	X8	N/A	FlexLOM	Proc 1

HPE Computation and Graphics Accelerators
The Apollo 4510 Gen10 can support 1 PCIe Accelerator in a Half Height Half Length slot. HPE 1.6TB NVMe Gen4 x8 High-Performance Mixed Use AIC HHHL PM1735 SSD (P26934-K21).

HPE Apollo 4510 Gen10 Cooling
Five (5) dual fan modules, shipped standard

HPE Apollo 4510 Gen10 Flex Slot your power!
Support for up to four (4) 800W or 1600W hot-plug redundant power supplies with up to 96% efficiency.
For 800W power supplies only: A minimum of three power supplies per chassis is required when two processors are selected.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center.

HPE Apollo 4510 Gen10 Lights Out! iLO
HPE iLO 5 ASIC. The rear of the chassis has 2 RJ-45 iLO ports.

HPE iLO with Intelligent Provisioning (standard) with Optional: iLO Advance and OneView

HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality.